EW OSAKI 大崎( OSAKI-EW ) 电源装置
HD-100M / HD100MA
HD-110M3 / HD-120M
Our clutch and brake are DC power operated, and DC power supply units as followings are necessary. Selection according to the characteristics of clutch or brake is requested.
model
|
Merits and specification
|
HD-100M
HD-100MA
|
Merits:
|
・
|
Small but high power. Applicable for clutch and brake upto 100watts.
|
・
|
Easy to install with only two set bolts, and applicable for vibratory or humid condition(indoor use).
|
Specification:
|
[HD-100M]
|
[HD-100MA]
|
rated input voltage.
AC
|
200/220V
|
100/110V
|
rated output current.
DC
|
1.3A
|
1.3A
|
rated output voltage.
DC
|
DC 90V
(at input voltage of AC200V)
|
DC 90V
(at input voltage of AC100V)
|
mechanical strength.
|
impact: dropping of 1.5m hight. no injury.
vibrate: W=5mm, Hz=50 no injury.
|
atmosphere temperature.
|
-20~+60 °C
|
dimesion.
|
73x70x40, pitch of holes for set bolts = 63
|
|
HD-110M3
HD-120M
|
Merits:
|
HD-110M3
|
・
|
Realize high-frequency driving by performing reshuffling from 180V to regular 90V with the output voltage instantly at no point of contact.
|
HD-120M
|
・
|
Reduced consumption electricity to 25% in comparison with HD-110M3 by decreasing to steady voltage 45V.
|
|
Specification:
|
[HD-110M3]
|
[HD-120M]
|
rated input voltage.
AC
|
200/220V
|
rated output current.
DC
|
1.8A
|
0.6A
|
rated output voltage.
DC
(at input voltage AC200V)
|
instant
|
180V
|
180V
|
always
|
90V
|
45V
|
duty cycle.
|
inching : 8 times/min
steady : 30 times/min
|
mechanical strength.
|
impact: dropping of 1.5m hight. no injury.
vibrate: W=5mm, Hz=50 no injury.
|
atmosphere temperature.
|
-20~+60°C
|
dimesion.
|
96x66x51, pitch of holes for set bolts = 84
|
|