blackbox工业多媒体转换器LGC328A-R2

black box工业多媒体转换器LGC328A-R2
型号：LGC328A-R2

产品描述：
Industrial MultiPower Media Converter, 10-/100-/1000-Mbps Copper to 1000-Mbps Single-Mode Fiber, Single-Strand, 1310-nm TX/1550-nm RX, 60 km, SC    

Product Highlights
Uses single-strand single-mode fiber cable.
**tended temperature range when used with DC power: -13 to +158o F (-25 to +70° C).
Can be used as a standalone device or DIN rail mounted.

Further Details
The 10-/100-/1000-Mbps copper port autonegotiates speed.

This Single-Strand Fiber Industrial MultiPower Media Converter seamlessly and transparently converts 10-/100-/1000-Mbps copper to 1000-Mbps fiber. As a Layer 2 media converter, it automatically senses and adapts to speed on the copper side for truly plug-and-play operation. 

Use this converter to **tend your network over fiber at distances up to 60 kilometers (37.2 mi.) on single-mode cable. This model both sends and receives over one strand of fiber by using different w**elengths in each direction. Because it uses only a single strand of fiber, you s**e on fiber infrastructure! 

Industrial MultiPower Media Converters are designed for use in harsh industrial environments. When used with DC power, the converters support an **tended temperature range of -13 to +158° F (-25 to +70° C), making them suitable for a wide range of industrial applications. 

In all, there are three different ways to power the converter: with its AC adapter, using 5–50-VDC terminal block power, or via an optional USB Power Adapter Cable, which you plug into your PC's USB port and is sold separately (LHC021A).

You can even use multiple power options at the same time to provide maximum redundancy and ensure that your mission-critical applications remain up and running. Then, if any one of these power sources fails, the other sources will continue to supply power to the converter seamlessly.

The converter comes with a DIN clip for DIN rail mounting. When installing multiple Industrial MultiPower Media Converters on a DIN rail, use one DC input source, then cascade from one DC block to the n**t until you reach the maximum current **ailable.